| RMS Power [Watts] |
| @ 14.4V, 4Ω stereo, ≤ 1% THD+N : 65 x 4 @ 14.4V, 2Ω stereo, ≤ 1% THD+N : 125 x 4 @ 14.4V, 4Ω mono, ≤ 1% THD+N : 250 x 2 |
| Length [in, cm] |
| 9-7/16, 24 |
| Height [in, cm] |
| 2-1/16, 5.2 |
| Width [in, cm] |
| 7-9/16, 19.1 |
| Frequency Response [Hz] |
| 20 – 20k |
| Signal-to-Noise Ratio [dB] |
| >95, A-weighted, re: rated power |
| Input Sensitivity |
| Low Level: 125mV–5V High Level: 250mV–10V |
| Selectable Electronic Crossover |
| AMP 1: OFF/HP; Variable 40Hz–180Hz, 24dB/Octave AMP 2: OFF/HP; Variable 40Hz–180Hz, 24dB/Octave |
| KickEQ™ Bass Boost |
| Variable 0–12dB @ 40Hz |
| KickEQ™ Bass Boost (end panel adjustable) |
| Variable 0–18dB @ 40Hz |
| KickEQ+™ Parametric Bass Boost (Remote Control Adjustable) |
| Boost : Variable 0-18db Adjustable Center Frequency : 24Hz-80Hz Bandwidth : .5-10 |
Grafik Kullanıcı Arayüzü Kontrolü (her kanal)
| Selectable Active Crossover |
| AMPS 1 and 2: Variable High Pass and Low Pass 10Hz–20,000Hz Adjustable Butterworth slope : OFF, 6, 12, 18 or 24dB/octave Adjustable Linkwitz-Riley slope : OFF, 6 or 12dB/Octave |
| KickEQ™ |
| Graphic 31 Band, 1/3 octave, + or – 12dB |
| Time Delay |
| Adjustable Delay : 0-20ms Adjustable increments : .02ms, .1 ms and 1.0 ms |
| Compressor |
| Adjustable Attack and Release time; Adjustable 1:1 – 10:1 ratio Adjustable Threshold, -80 – 10dB |
| Input Mixer |
| Maps signal inputs to specified speaker outputs |
CEA Specifications
| CEA Power |
| 65x 4 @ 4 ohms, 14.4VDC, 1% THD, CEA-2006B (Watts) |
| CEA Signal-to-Noise Ration |
| -80dB CEA-2006B (ref: 1W, A-weighted) |
