Back
Önceki ürün
DSP 1600 – 1 OHM DSP 1600 – 1 OHM
Sonraki ürün
DSP 1600 – 4 OHMS DSP 1600 – 4 OHMS
Büyütmek için tıklayın
Ürün Videosunu İzleyebilirsiniz

DSP 1600 – 2 OHMS

Amplificador Classe D 1600 watts RMS 2 ohms

<iframe width=”669″ height=”376″ src=”https://www.youtube.com/embed/LjfWD_e4qyo” frameborder=”0″ gesture=”media” allowfullscreen></iframe>

İstek Listeme Ekle
Karşılaştır
Categories: , ,
Açıklama
LineLine DSP
ReferenceDSP 1600 – 2 ohms
Operation ClassClass D
Number of Channels01
Max Output Power@13,8 VDC – 2 OHMS: 1976W RMS
@13,8 VDC – 4 OHMS: 1304W RMS
@13,8 VDC – 8 OHMS: 751W RMS
@12,6 VDC – 2 OHMS: 1600W RMS
@12,6 VDC – 4 OHMS: 1066W RMS
@12,6 VDC – 8 OHMS: 620W RMS
Analog Digital Converter (ADC)24 bits, 96kHz, 110dB Dynamic Range
Digital Signal Processing (DSP)24 bits, 96kHz
Input Sensitivity250mV (Vol=100%)
Frequency Response@-1dB: 22Hz to 20kHz(-1dB)
@-3dB: 14Hz to 23kHz(-3dB)
Crossover High Pass (HPF)Full to 1kHz (-24dB/8ª) Variable
Crossover Low Pass (LPF)50Hz to Full (-24dB/8ª) Variable
Bass Boost0 to +10,5dB*
Limiters / Anti-clippingSelectable 30%, 20%, 10% and 1%
Thermal ManagementSmart Cooler (cooler driven by temperature or audio, with two speeds)
Input Impedance18K OHMS
Protection SystemShort into Output / Power Supply High/Low / Thermal Protection
Maximum Supply Voltage16VDC
Idle Consumption1,10A
Musical Maximum Consumption@ 12,6VDC: 79,5A
Sinusoidal Signal Maximum Consumption(1Khz) @12,6 VDC: 159A
Dimensions (WxHxD)230 x 73 x 177mm
Additional Information* Parametric, 0 to + 10.5dB at 40/50/60 / 80Hz.
* Power measured at 1KHz, nominal impedance (resistive load 1, 2 and 4 OHMS). Temperature 25ºC, THD around 3%.
* Due to tolerances of internal components and the manufacturing process, the technical characteristics presented here can vary around 5%.