| Line | Line DSP |
| Reference | DSP 1600 – 1 ohm |
| Operation Class | Class D |
| Number of Channels | 01 |
| Max Output Power | @13,8 VDC – 1 OHM: 1976W RMS @13,8 VDC – 2 OHMS: 1304W RMS @13,8 VDC – 4 OHMS: 751W RMS @12,6 VDC – 1 OHM: 1600W RMS @12,6 VDC – 2 OHMS: 1066W RMS @12,6 VDC – 4 OHMS: 620W RMS |
| Analog Digital Converter (ADC) | 24 bits, 96kHz, 110dB Dynamic Range |
| Digital Signal Processing (DSP) | 24 bits, 96kHz |
| Input Sensitivity | 250mV (Vol=100%) |
| Frequency Response | @-1dB: 22Hz to 20kHz(-1dB) @-3dB: 18Hz to 30kHz(-3dB) |
| Crossover High Pass (HPF) | Full to 1kHz (-24dB/8ª) Variable |
| Crossover Low Pass (LPF) | 50Hz to Full (-24dB/8ª) Variable |
| Bass Boost | 0 to +10,5dB* |
| Limiters / Anti-clipping | Selectable 30%, 20%, 10% and 1% |
| Phase Selector | 0/180º |
| Thermal Management | Smart Cooler (cooler driven by temperature or audio, with two speeds) |
| Input Impedance | 18K OHMS |
| Protection System | Short into Output / Power Supply High/Low / Thermal Protection |
| Maximum Supply Voltage | 16VDC |
| Idle Consumption | 1,0A |
| Musical Maximum Consumption | @ 12,6VDC: 87A |
| Sinusoidal Signal Maximum Consumption | (1Khz) @12,6 VDC: 174A |
| Dimensions (WxHxD) | 230 x 73 x 177mm |
| Additional Information | * Parametric, 0 to + 10.5dB at 40/50/60 / 80Hz. * Power measured at 1KHz, nominal impedance (resistive load 1, 2 and 4 OHMS). Temperature 25ºC, THD around 3%. * Due to tolerances of internal components and the manufacturing process, the technical characteristics presented here can vary around 5%. |
